76 MM Round Solid Tube Straight Unbrake Trailer Axle 2500-3500 Kg
BOLT PATTERN
Use the distance between the center of one bolt hole to the center of the bolt hole adjacent to it:
If the distance is:
2-5/8" - the bolt pattern is 5 on 4-1/2
2-3/4" - the bolt pattern is 5 on 4-3/4
3" - the bolt pattern is 5 on 5
3-1/4" - the bolt pattern is 5 on 5-1/2
Hub Face (HF):
measure from one end of the axle where the lug bolts protrude out from to the other end at the same point. This is the Hub Face.
5* 4.5" wheel bolts pattern | NO. | Description | QTY | option 1 | option 2 | option 3 | 1 | axle shaft | 1 | 60*5mm round tube | 50mm Rd / Sq solid | | 2 | mounting plate | 2 | AT01200107 | | | 3 | 10" brake plate | 2 | AZ004UR | AZ013UR | AZ026L/R | 4 | bolt, washer & nut | 8 | AC00100501/2/3 | | | 5 | oil seal | 2 | AC00300201 | | | 6 | inner bearing | 2 | L68149/11 | | | 7 | 10" hub drum | 2 | AC00300300 | | | 8 | wheel nut | 10 | 1/2"-10UNF | | | 9 | outer bearing | 2 | L44649/10 | | | 10 | flat washer | 2 | AC00201001 | | | 11 | castle nut | 2 | AC00200701 | | | 12 | split pin | 2 | AC00200404 | | | 13 | dust cap | 2 | AC00300601 | | | |


FAQ:
1: Could you please make us an offer as soon as possible?
In order to get the price quickly and accurately, please provide the technical drawing or OE number, we will be very grateful.
2: Could you please provide us with the specifications of the products?
Sure, please confirm the product code you need before that.
3: How can you guarantee the quality of your products?
Our products have passed ISO9001 international quality standard certification. Our company has a very strict quality control system.
4: How to solve the problems in the later stage?
We are confident in our products. We pack them well to make sure they are well protected.
In trailers, the parking brake, also called hand brake, emergency brake, or e-brake, is a latching brake usually used to keep the vehicle stationary. It is sometimes also used to prevent a vehicle from rolling when the operator needs both feet to operate the clutch and throttle pedals. Automobile hand brakes usually consist of a cable directly connected to the brake mechanism on one end and to a lever or pedal at the driver's position. The mechanism is often a hand-operated lever (hence the hand brake name), on the floor on either side of the driver, or a pull handle located below and near the steering wheel column, or a (foot-operated) pedal located far apart from the other pedals.